大飞机缝翼滑轨影响研究

通过数值模拟和风洞实验两种手段研究了大飞机缝翼滑轨对飞机气动性能的影响.分析了缝翼滑轨对缝道和机翼表面流动分布的影响,获得了缝翼滑轨参数对飞机气动性能的影响规律.数值模拟结果表明:缝翼滑轨对缝道内的流动形成了阻塞,改变了机翼表面的流动形态,减小了机翼附面层流动速度,降低了飞机的失速性能.实验结果表明:通过减小滑轨宽度、减少滑轨数量、采用圆形截面滑轨和滑轨外弯等能够有效降低滑轨影响,改善飞机失速性能;滑轨参数对小尺度模型实验结果的影响尤为显著.研究结果为3m量级和8m量级风洞缝翼滑轨模型设计提供了参考.     

基于激光的便携式飞机装配接缝质量检测仪及应用

介绍了一种基于激光的便携式接缝质量检测仪的工作原理及硬件组成。使用该检测仪对飞机缝隙和台阶阶差进行了测量,通过与人工测量进行对比验证,证明了该装置可实现对特征三维信息的快速自动检测,工作准确可靠。     

固体冲压发动机喷管用C/C-SiC复合材料

采用"化学气相渗透+先驱体浸渍裂解"(CVI+PIP)混合工艺制备固体冲压发动机用C/C-SiC复合材料喷管内层,综合考查复合材料的微观结构、弯曲性能和抗烧蚀性能以及固冲发动机C/C-SiC喷管内层水压和点火实验。结果表明:复合材料的弯曲强度达到197 MPa,且断裂破坏行为呈现典型的韧性模式;复合材料具有优异的抗氧化烧蚀性能,氧化烧蚀200 s后线烧蚀率仅为0.0063 mm·s-1;研制的C/C-SiC复合材料构件的水压爆破压强为6.5 MPa,表明构件具有良好的整体承载能力;C/C-SiC复合材料喷管内层高温综合性能通过了固体冲压发动机点火实验考核。     

TMS320C6678多核DSP的加载配置和实现方法

程序代码正确的固化加载运行是多核DSP应用的前提和基础.简要介绍了DSP的加载器和加载过程,阐述了多核处理器件的加载配置管理方法.以TI公司的多核DSP TMS320C6678为例,介绍了多核DSP的加载模式和流程,详细阐述了EMIF16的Nor FLASH加载实现方法,可以实现多核DSP软件的正确、可靠加载运行.     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

A statistical study of C IV regions in 20 Oe-stars

In this paper, using the Gauss-Rotation model (GR model), we analyse the UV C IV resonance lines in the spectra of 20 Oe-stars of different spectral subtypes, in order to detect the structure of C IV region. We study the presence and behavior of absorption clouds and analyse their characteristics. From this analysis we can calculate the values of a group of physical parameters, such as the apparent rotational and radial velocities, the random velocities of the thermal motions of the ions, the Full Width at Half Maximum (FWHM), the optical depth, as well as the absorbed energy and the column density of the independent regions of matter, which produce the main and the satellite clouds of the studied spectral lines. Finally, we present the relations between these physical parameters and the spectral subtypes of the studied stars and we give our results about the structure of the C IV region in their atmosphere.     

热障涂层表面裂纹水浸超声检测

为有效检测热障涂层(TBCs)表面裂纹,进行了热障涂层表面裂纹水浸超声检测技术的应用研究。以常用的大气等离子喷涂(APS)热障涂层作为试验材料,采用水浸超声检测回波声程差和C扫描图像对不同深度、宽度和长度的热障涂层表面裂纹进行了表征。结果表明:热障涂层基体材料对热障涂层表面裂纹的检测效果无明显影响;通过优化检测参数和合理选用仪器探头,利用水浸超声方法可实现对热障涂层表面深度为0.1 mm、长度为2 mm裂纹的有效检测;水浸超声检测技术可以获得裂纹的长度、深度参数,是解决热障涂层表面裂纹检测问题的有效方法。      

含氢 WC/ C 复合涂层在不同润滑油环境的摩擦性能

利用非平衡磁控溅射技术,通过同时离化乙炔气体和共溅射石墨靶与碳化钨靶,在304不锈钢和单晶硅基底上沉积具有Cr过渡层和WC过渡层的含氢WC/C复合涂层。采用扫描电镜、Raman光谱仪、X射线衍射仪、纳米压痕仪等对涂层的微观结构、力学性能进行分析。利用Rtec摩擦磨损试验机对WC/C复合涂层与304不锈钢基底在PAO基础润滑油环境、发动机润滑油环境以及腐蚀性发动机润滑油环境进行摩擦性能测试。结果表明:涂层内含有较多类石墨sp2键,WC1-x相镶嵌在非晶碳基质中构成多相复合结构;涂层的硬度和弹性模量明显高于304不锈钢基底,且其H/E值远高于基底;与304不锈钢基底相比,在三种润滑油环境下涂层均具有较低的摩擦因数和磨损率。     

WC/C复合涂层海水环境的耐蚀性与摩擦性能

采用非平衡磁控溅射技术在304L不锈钢和单晶硅基底上沉积WC/C多层复合涂层,利用扫描电镜、Raman光谱仪、X射线衍射仪等研究WC/C复合涂层的微观结构,采用纳米压痕仪、划痕测试系统测试涂层的力学性能,利用电化学测试系统和摩擦磨损试验机分别研究涂层在人工配置的海水环境的耐蚀性能和摩擦性能。结果表明:WC/C复合涂层内含有较多类石墨sp2键结构,存在WC1-x相并镶嵌在非晶碳基质中。较之于304L不锈钢基底,WC/C复合涂层在海水环境中表现出更好的耐蚀性与更优异的摩擦适应性。     

一种微内核分区操作系统C库的适配验证方法

针对传统C库的开发和适配方法存在的局限性问题,提出一种基于微内核架构的嵌入式分区操作系统新C库的适配验证方法,依次对基于微内核架构的嵌入式分区操作系统之上C库的总体部署方案、初始化过程、典型功能模块的适配开发方法进行了详细阐述;搭建相应的硬件测试环境,在恩智浦公司的四种硬件平台上对开发和适配的C库进行了相应的功能测试和验证,提出了三个创新点.